保定冷干机,冷干机是对压缩空气进行后处理，因此选型规则根据空气压缩机提供的技术参数来选。主要的参数有以下几点:
Baoding cold drying machine, the cold dry machine is the compressed air after treatment, so the selection rules according to the technical parameters provided by the air compressor to choose. The main parameters are the following:
1.空气压力：冷干机主要处理空气净化部分于蒸发器中实现，蒸发器为三类压力容器。按工作压力分有低压型（0.3-0.6MPa）、普通型（0.6-0.95MPa）和中、高压型（≥1.0MPa）三类，且市场空压机压力从低到高种类非常繁多，冷干机压力选型和储气罐一样，按照空气压缩机产生的空气压力进行选择冷干机的压力类型。一般我公司正常生产都为1.0Mpa下机型，如果高于1.0Mpa上机型需特别定制。
1. air pressure: the cooling dry machine mainly deals with the air purification part in the evaporator, and the evaporator is the three type pressure vessel. According to the working pressure is low (0.3-0.6MPa), ordinary type (0.6-0.95MPa) and high pressure (more than 1.0MPa) three, and the market pressure of air compressor from low to high are very diverse species, cold and dry machine pressure type and gas tank, selection pressure type cold dry air pressure produced by machine air compressor. In general, the normal production of our company for the 1.0Mpa model, if higher than the 1.0Mpa model needs to be specially customized.
2.空气处理流量：压缩空气流量不可超过额定处理量的10%。一般选型时冷干机稍可选则大于空压机排气量，这样空气处理效果更加。我公司接受 0.5~500 M3/min 及更大气流量机型的定制。
2. air treatment flow: the compressed air flow can not exceed 10% of the rated capacity. In general, the cold dry machine is slightly larger than the air compressor, so that the effect of air treatment is more. Our company accepts the custom of 0.5~500 M3/min and the more air flow model.
3.压缩空气出口温度：冷干机按进气温度高低分有高温进气型（80℃以下）和常温进气型（45℃以下）；如果高温的气体进入常温机型中，会产生高负载跳闸现象，影响机器的正常运转。
3., the compressed air outlet temperature: the cold dryer is divided into a high temperature inlet type (below 80 degrees C) and a normal temperature inlet type (below 45 degrees) according to the inlet air temperature. If the high temperature gas enters the normal temperature type, it will cause high load trip phenomenon and affect the normal operation of the machine.
4.冷却方式：根据制冷系统，可分为水冷型和分冷型两类。
4. cooling mode: according to the refrigeration system, it can be divided into two types: water cooling type and sub cooling type.
我公司机型的具体选型的型号表示方式如下：
The specific type of model selection of our company model is as follows:
如 TYAD-3F/TYCD-3F 表示处理量为3 m3/min A 表示常温型,C表示高温 F 表示风冷型
For example, TYAD-3F/TYCD-3F indicates that the processing quantity is 3 m3/min A to represent the normal temperature type, and C indicates that the high temperature F represents the air cooling type
如TYAD-30W/TYCD-30W 表示处理量为30 m3/min A 表示常温型,C表示高温 W 表示水冷型保定冷干机
For example, TYAD-30W/TYCD-30W indicates that the processing quantity is 30 m3/min A to represent the normal temperature type, and C indicates that the high temperature W represents the water-cooled Baoding cold drying machine
冷干机是对压缩空气进行后处理，因此选型规则根据空气压缩机提供的技术参数来选。主要的参数有以下几点:
The cold dryer is the post treatment of compressed air, so the selection rules are selected according to the technical parameters provided by the air compressor. The main parameters are the following:
1.空气压力：冷干机主要处理空气净化部分于蒸发器中实现，蒸发器为三类压力容器。按工作压力分有低压型（0.3-0.6MPa）、普通型（0.6-0.95MPa）和中、高压型（≥1.0MPa）三类，且市场空压机压力从低到高种类非常繁多，冷干机压力选型和储气罐一样，按照空气压缩机产生的空气压力进行选择冷干机的压力类型。一般我公司正常生产都为1.0Mpa下机型，如果高于1.0Mpa上机型需特别定制。
1. air pressure: the cooling dry machine mainly deals with the air purification part in the evaporator, and the evaporator is the three type pressure vessel. According to the working pressure is low (0.3-0.6MPa), ordinary type (0.6-0.95MPa) and high pressure (more than 1.0MPa) three, and the market pressure of air compressor from low to high are very diverse species, cold and dry machine pressure type and gas tank, selection pressure type cold dry air pressure produced by machine air compressor. In general, the normal production of our company for the 1.0Mpa model, if higher than the 1.0Mpa model needs to be specially customized.
2.空气处理流量：压缩空气流量不可超过额定处理量的10%。一般选型时冷干机稍可选则大于空压机排气量，这样空气处理效果更加。我公司接受 0.5~500 M3/min 及更大气流量机型的定制。
2. air treatment flow: the compressed air flow can not exceed 10% of the rated capacity. In general, the cold dry machine is slightly larger than the air compressor, so that the effect of air treatment is more. Our company accepts the custom of 0.5~500 M3/min and the more air flow model.
3.压缩空气出口温度：冷干机按进气温度高低分有高温进气型（80℃以下）和常温进气型（45℃以下）；如果高温的气体进入常温机型中，会产生高负载跳闸现象，影响机器的正常运转。
3., the compressed air outlet temperature: the cold dryer is divided into a high temperature inlet type (below 80 degrees C) and a normal temperature inlet type (below 45 degrees) according to the inlet air temperature. If the high temperature gas enters the normal temperature type, it will cause high load trip phenomenon and affect the normal operation of the machine.
4.冷却方式：根据制冷系统，可分为水冷型和分冷型两类。
4. cooling mode: according to the refrigeration system, it can be divided into two types: water cooling type and sub cooling type.
我公司机型的具体选型的型号表示方式如下：
The specific type of model selection of our company model is as follows:
如 TYAD-3F/TYCD-3F 表示处理量为3 m3/min A 表示常温型,C表示高温 F 表示风冷型
For example, TYAD-3F/TYCD-3F indicates that the processing quantity is 3 m3/min A to represent the normal temperature type, and C indicates that the high temperature F represents the air cooling type
如TYAD-30W/TYCD-30W 表示处理量为30 m3/min A 表示常温型,C表示高温 W 表示水冷型
For example, TYAD-30W/TYCD-30W indicates that the processing quantity is 30 m3/min A to represent the normal temperature type, and C indicates that the high temperature W represents the water cooling type
